Table of Contents
Advertisement
17
Using the Main Menu
2. Click DISPLAY, then click the Display tab on the side panel.
3. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Camera Display: Check to show the channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on the live
display. This setting does not affect recordings.
• AI Rule: Check to display captured faces on the right side of the live display. Face detec-
tion must be enabled on the correlating channel.
• Original Scale: Set the system to show the true aspect ratio of the cameras on the live
display. This may add black bars on the top and bottom of the image.
4. Click Apply to save changes.
17.3 Configuring Sequence Mode
Sequence mode cycles through connected channels to give you an overview of what is happen-
ing on all cameras. You can customize the order that channels appear in Sequence mode, as well
as configure which viewing modes should be used.
To configure Sequence mode:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
#LX400113; r. 9.0/57191/57191; en-US
58
Advertisement
Table of Contents
