Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 128 Monday, June 11, 2001 5:02 PM
User Tools (Copier Features)
❖ ❖ ❖ ❖ Print Start Trigger
Specifies whether all the originals should be scanned first, or not.
To scan the originals first and then copy when the {Start} key is pressed, press
the [Press Start Key] key, To start copying automatically after the originals
have been scanned, press the [Set Original] key.
• Press Start Key
• Set Original
Note
❒ Default: Set Original
❖ ❖ ❖ ❖ Original Size Auto Detect
Specifies whether to detect the size of the original or not.
If On is selected, the machine automatically detects the size of the original. If
4
Off is selected, the machine ignores the original size and assumes it is the larg-
est size original. For example, to copy a an original 841mm wide, or JIS B se-
ries size or other custom size original, set this setting to Off to scan the
original at the maximum width of 914mm. (In this case, be sure to select a pa-
per size larger than the original when making the copy. (When enlarging, be
sure to select a size larger than the original size × reproduction ratio.))
• Off
• On
Note
❒ Default: On
❒ When using 30" width original, set this setting to Off.
General Features 2/2
❖ ❖ ❖ ❖ Memory Status Display
Specifies how the amount of remaining memory should be displayed. If you
select [Page], it is displayed as a number of A1(D) pages.
• Percentage
• Page
Note
❒ Default: Page
❖ ❖ ❖ ❖ Maximum Copy Quantity
Specifies the maximum number of copies that can be made with the Repeat
Copy function. See p.34 "Repeat Copy"
Note
❒ Default: 99 copies
❒ The value can be set from 0 to 99 copies.
128
Advertisement
Table of Contents
