Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 123 Monday, June 11, 2001 5:02 PM
4. User Tools (Copier Features)
Accessing The User Tools (Copier Features)
This section is for the key operation in
charge of this machine. You can
change or set the machine's default
settings.
Preparation
Any changes you make with the
user tools remain in effect even if
the main power switch or opera-
tion switch is turned off, or the
{Clear Modes/Energy Saver} key is
pressed.
Reference
For details about the System set-
tings, see the System Settings man-
ual.
A
Press the {User Tools/Counter} key.
The User Tools menu is displayed.
B
Press the [Copier Features] key.
C
Select the desired User Tools menu.
The relevant settings screen is dis-
played for the item selected.
Reference
⇒ p.125 "User Tools Menu
(Copier Features)"
D
Change the settings as described
in the on-screen instructions, and
then press the [OK] key.
Note
❒ Use the {·} key to enter a deci-
mal point.
ZEDS100E
❒ If you press the [Cancel] key, the
changes to the settings are can-
celled and the previous screen is
displayed.
Reference
For details about how to set or
change settings, see the System
Settings manual. See p.126 "Set-
tings You Can Change with the
User Tools"
ZEDS090E
123
Advertisement
Table of Contents
