Installing The Printer Driver Using Usb - Ricoh 3532 Operating Instructions Manual

Setting Up the PPD File
A A A A
Run Print Center.
B B B B
Click [Add Printer].
Note
❒ Select [AppleTalk] in the first
pop-up menu.
❒ If the zone has been set, select
the zone in the second pop-up
menu.
C C C C
Select the PPD file for the model
you are using from the [Printer
Model:]pop-up menu.
D D D D
Click [Add].
Setting Up Options
Limitation
❒ You can make all the settings of
printer features, even if the neces-
sary option is not installed, due to
the limitation of Mac OS X native
mode. Confirm which option is in-
stalled to the machine before you
print.
Installing the Printer Driver
Using USB
This section gives basic instructions
for installing printer drivers using
USB. The printer drivers can be in-
stalled from the CD-ROM that comes
with this machine.
Preparation
Make sure that all other applica-
tions are closed and the computer
is not printing before installation.
Windows 98 SE/Me - Installing the Printer
Driver Using USB
The procedure below uses Windows
98 as an example. The procedure for
Windows Me may be slightly differ-
ent.
When the USB interface cable is used
for the first time, the "plug and play"
function starts and [New Hardware
Found], [Device Driver Wizard] or [Found
New Hardware Wizard] dialog box ap-
pears, depending on the system used.
If printer drivers are already in-
stalled, the "plug and play" is dis-
played, and the printer with its port
directed to the USB interface cable is
added to the Printers folder.
A A A A
Click [Next].
B B B B
Select [Search for the best driver for
your device. {Recommended}.], and
then click [Next].
C C C C
Check [Specify a location:], and then
click [Browse...].
The [Browse for Folder] dialog box
appears.
D D D D
Insert the CD-ROM provided
into the CD-ROM drive.
Installing the Software
31
2