Quick Install - Ricoh 3532 Operating Instructions Manual

Quick Install

Auto Run will start the installer auto-
matically when you insert the CD-
ROM into the CD-ROM drive. By se-
lecting Quick Install, you can easily
install the PCL 6 printer driver and
the RPCS™ printer driver. SmartNet-
Monitor for Client can also be in-
stalled provided the machine and the
computer are connected via the net-
work.
Preparation
Before starting installation, Close
all documents and applications.
The following conditions are re-
quired:
• Windows 95/98/Me, Windows
2000/XP, or Windows NT 4.0
For Ethernet connections:
• The machine must be connected to
the network using an Ethernet ca-
ble.
• TCP/IP protocol must be config-
ured.
• The IP address must be assigned to
both machine and computer.
• The wireless LAN board is in-
stalled and the connection is prop-
erly made.
For parallel connections:
• The machine must be connected to
the computer using a parallel ca-
ble.
• Bidirectional transmission must be
enabled.
Important
❒ If your system is Windows NT 4.0,
we recommend that you upgrade
the Windows NT 4.0 operating
system to Service Pack 4 or later
before installing the PCL 6/5e or
RPCS™ printer drivers. Contact
your Windows retailer for more in-
formation about the latest versions
available.
Note
❒ When the machine is connected to
the computer using the IEEE 1394
interface or the USB 2.0 interface,
Quick Install cannot be used. See
p.31 "Installing the Printer Driver
Using USB", p.33 "Installing the
Printer Driver Using IEEE 1394".
A A A A
Close all applications running.
B B B B
Insert the CD-ROM into the CD-
ROM drive.
Auto Run will start the installer.
C C C C
Select a language for the interface
language, and then click [OK].
The following languages are avail-
able: Cestina (Czech), Dansk (Dan-
ish), Deutsch (German), English
(English), Espanol (Spanish),
Francais (French), Italiano (Italian),
Magyar (Hungarian), Nederlands
(Dutch), Norsk (Norwegian), Polski
(Polish), Portugues (Portuguese),
Suomi (Finnish), Svenska (Swed-
ish)
The default interface language is
English.
D D D D
Click [Quick Install].
The software license agreement
appears in the [License Agreement]
dialog box.
Installing the Software
15
2