Preparing The Printer; Connecting The Machine - Ricoh 3532 Operating Instructions Manual

Preparing to Print

Preparing the Printer

Connecting the Machine

Reference
2 For information about connection
using an Ethernet and wireless
LAN interface, see "Confirming
the Connection", Network Guide.
For information about connection
using Bluetooth
that comes with optional Bluetooth
interface unit.
Requirements
Before using this machine, make sure
all environmental and electrical re-
quirements are met. Connect the ma-
chine to the host computer using the
parallel port, network interface unit,
or both.
Make sure all cables, connectors, and
electrical outlets necessary to attach
the machine to the host computer or
network are present.
Connecting the Machine to the Host
Using the Parallel Cable/SCSI Print (IEEE
1394) Cable
Connect the machine to the host com-
puter using the parallel port or op-
tional IEEE 1394 interface board. This
machine does not come with a paral-
lel cable to connect the machine to the
host computer.
The machine's parallel interface is a
standard bidirectional interface. It re-
quires a standard IEEE 1284 compli-
ant 36-pin parallel cable and a parallel
port on the host computer. Make sure
to purchase the appropriate cable for
the machine and your computer.
8
TM
, see the manual
Note
❒ Do not use a parallel cable that is
longer than 3 meters (10 feet).
❒ Rating voltage of the interface con-
nector: Max. DC 5V
Follow the procedures below to con-
nect the machine to the host computer
using a parallel cable.
Important
❒ Before connecting the machine and
a computer using an interface ca-
ble, make sure that the machine is
not operating, and then turn off the
main power switches of the ma-
chine and computer.
❒ Be sure to use the designated inter-
face cable. Other cables may cause
radio interference.
A A A A
Turn off the main power switch.
Important
❒ Before turning off the main
power switch, see "Turning Off
the Power", General Settings
Guide.
B B B B
Plug the cable into the port.
❖ ❖ ❖ ❖ Parallel Connection
ZHZH010J