Table of Contents
Advertisement
Printer Controller RW-470
The RW-470 Software works only, if you have installed an con-
troller. You have to install the Printer Controller RW-470 and the
appropriate software. In the next chart the technical data are
listed. In the following chapter the installation of the kernel
driver is explained.
Technical Data
Item
PCI style
Bus-Width
max. PCI bus clock
physical dimension
PCB dimension
power supply
max power consumption
max memory on board
Connection to copier
max. cable length
fault tolerance
onboard processor
copier interface
PC resources
scanning
plotting
max pix per line
scan and plot resolution
max scan length
max plot length
plotting speed
OS
rasterization process
EMI
PRINTER CONTROLLER RW-470
Specification
PCI Version 2.0, Busmaster
32 Bit
33 MHz
190 mm x 128 mm
174,63 mm x 106,8 mm
3.3 Volts
type. 7.5 W, max. 15 W
96 MB
Ricoh IF-cable
5 m
by software shutdown
logic cell Spartan LCA
according Ricoh APIP
1 x IRQ, I/O range, 2 x
memory window 32 MB
binary data
binary data
21600 pixels
600 dpi
6000 mm
6000 mm
90 mm/sec
Win 2000 Professional
3 step pipeline mode yield
full engine speed
fcc 47 part 15
RW-470
7
Advertisement
Table of Contents
