Table of Contents
Advertisement
Additional font paths
To enter additional font paths and thus additional fonts proceed
(if you are the administrator) as follows:
1. Open the registry editor. Select the following file:
\\HKEY_LOCAL_MACHINE\SOFTWARE\RW-
470\PLOTBASE\PLOTSERVER\3.0\FORMATS\RW-470PS
EPS\
FontPath
Open an edit dialog by double clicking on the file name.
2. The existing entry ".;.\Font" of the above figure is based on
the following syntax rules:
•
. (Full stop): the font path is in the current folder
•
; (Semicolon): begins a new font path
•
.\ (Full stop, back slash): the font path is in the subfolder
.\<subfolder>
The existing entry ".;.\Fonts" means that the actual font is lo-
cated in the current folder (RW-470PS / Eps) or in the
"Fonts" subfolder of the current folder.
Now enter a new font path in the "Value" field behind the exist-
ing font path. Define additional fonts using the syntax described
above.
ADDITIONAL FONT PATHS
RW-470
/
17
Advertisement
Table of Contents
