Table of Contents
Advertisement
PRODUCING SSL FILES
Producing SSL files
The structure and commands of the SSL files are described in
this chapter. You can use the SSL commands to configure the
print job yourself. There are three classes of SSL commands:
Structured commands, SSL commands and parameters.
This description explains the structured commands first, there
then follows an alphabetical list of the SSL commands with the
corresponding parameters.
Structured commands
A job begins with BeginJob <name> and ends with EndJob.
The defaults for the plot files are defined immediately below Be-
ginJob, and are based on commands related to the set and plot
file. The block with commands for the plot file starts with Be-
ginOutput and ends with EndOutput.
Structured
command:
BeginJob
EndJob
BeginOutput
EndOutput
Example 1:
BeginJob Project 6
Comment: EntryA
BeginOutput
EndOutput
Comment: EntryB
BeginOutput
18
RW-470
Syntax:
BeginJob <name>
EndJob
BeginOutput
EndOutput
OutputSize A4
Name "file2.plt"
Directory "C:\spool\ssl\Project 6"
OutputSize A2
Copies 2
Name "file3.plt"
Directory "C:\spool\ssl\Floorplan 3"
Example:
BeginJob Project 6
-
-
-
Advertisement
Table of Contents
