Gestetner 27AO Technical Manual page 53

REGISTRY ENTRIES
Type:REG_DWORD
Data: 00000000
[Comment: Direction of the drawing rotation, clockwise or anti-
clockwise]
Name: SizeTolerance [mm]
Type:REG_DWORD
Data: 00000002
[Comment: If the printout is this value larger than the roll avail-
able, then nevertheless plotted]
Key name:SOFTWARE\ RW-470\PLOTBASE \ PLOTSERVER\
3.0\PBWnd
These values give the colors of the jobs in the job list. The RGB
colors are given in hexadecimal figures. The last six figures are
used for this. Moving from right to left, the first two numbers
stand for "R", the next two "G", then "B". Example: The color
blue is printed off with the following hexadecimal number:
00ff0000
Name: ColorPending
Type:REG_DWORD
Data: 00000000
[Comment: Color for "Idle" status]
Name: ColorError
Type:REG_DWORD
Data: 000000c0
[Comment: Color for "Problem" status]
Name: ColorPlotting
Type:REG_DWORD
Data: 0000c000
[Comment: Color for "Printing" status]
Name: ColorOk
Type:REG_DWORD
Data: 00000000
[Comment: Color for "OK" status]
RW-470 53