Table of Contents
Advertisement
d. Carry out a "Test plot", to check correct function of
the plotter. For that select "Job – Test Print".
e. Check whether the "Interrupt" switch at the scanner
display has been activated. Deactivate it.
f.
Check the connection cable between the scanner
and server.
2. File error
a. If a file certain file type (PDF, CGM, or similar.) can-
not be printed, you must first acquire the relevant li-
censes for these optional file formats and install a
license file.
b. The file is possibly damaged. Send the file to RW-
470 PLOTBASE again or transfer the file to the
server in another file format.
c.
A printed stamp is defined larger than the drawing
format.
3. Others
a. Check whether the required type of media is avail-
able.
b. Check the width of the available plotter rolls.
• A file has not been plotted, the job in the job list has
the status "manual" (Color light blue)
The following reasons are possible:
1. The job is password protected.
The printout can only be started manually by the user af-
ter a password has been entered.
2. Test print is activated
The printout has to be started manually, so that a test
print out can be plotted first.
• Color drawings
Colors are represented in RW-470 PLOTBASE by a raster
density. You can set the "colors" in two different ways. Open
the "Additional" tab in the job editor and click on the „Pen
Settings" button, if the entry is a HPGL/2 or Calcomp format.
Here you can set each individual color for the respective for-
FREQUENTLY ASKED QUESTIONS
RW-470
11
Advertisement
Table of Contents
