FITTING AND REMOVAL OF BASE
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
Hold the monitor and push the Stand until it
clicks and is secure.
Hold the monitor and push the Stand-Base until
it clicks and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
Press and hold the hooks inside, and pull the
Stand-Base.
Press the stopper at the top of the stand by the
thin stick and pull it to remove the stand from the
monitor.
6 BEFORE YOU OPERATE THE MONITOR
Thin stick
Stand
Stand-Base
Hooks