Connecting Your Monitor - Iiyama G-Master GE2288HS-B1 User Manual

CONNECTING YOUR MONITOR

Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power source.
Turn on your monitor and computer.
NOTE  The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
 Make sure you tighten the fi nger screws at each end of the signal cable.
 The Class I pluggable equipment Type A must be connected to protective earth.
 The socket-outlet shall be installed near the equipment and shall be easily accessible.
 Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
Power Cable (Accessory)
* DVI-D cable is not supplied with the monitor. If you use low quality DVI-D cable, it may cause a
result of electro-magnetic interference. Please contact the iiyama Support Centre in your country if
you wish to connect the monitor via the DVI input.
8 BEFORE YOU OPERATE THE MONITOR
<Back>
DVI-D Cable (Not Included)*
Audio Cable (Accessory)
HDMI Cable (Accessory)
Computer
AV Equipment etc.