Table of Contents
Advertisement
Copying
Slip Sheets
Every time the originals' page chang-
es, a slip sheet is inserted. This func-
tion can be used to automatically
insert a slip sheet between OHP
transparencies, or as a stacking func-
2
tion. You can also copy onto slip
sheets.
Preparation
Before selecting this function, set
the tray for slip sheets. See "Slip
Sheet Tray" in "Tray Paper Set-
tings", General Settings Guide.
Note
❒ Load slip sheets in the same size
and orientation as copy paper or
OHP transparencies.
❖ ❖ ❖ ❖ When using OHP transparencies from
the bypass tray
• Copy
• Blank
82
❒ Press the { { { { #} } } } key and select [OHP
❒ Paper will be delivered to the ex-
A A A A
B B B B
C C C C
D D D D
E E E E
2
1
2
1
Note
Sheet] in Special paper. See p.24
"When copying onto OHP Trans-
parencies or Thick Paper".
ternal tray when copying onto
OHP transparencies or thick paper
from the bypass tray, even if you
have specified not to use the exter-
nal tray as the output tray.
Press [Cover/Slip Sheet].
Press [Slip Sheet].
Select [Copy] or [Blank], and then
press [OK].
Select the paper tray containing
the sheet paper to copy the origi-
nals.
When using OHP transparencies,
open the bypass tray.
Place the originals, and then press
the { { { { Start} } } } key.
Advertisement
Table of Contents
