Grounding Instructions - Sharp R-22JT Operation Manual

1200 watts-heavy duty commercial microwave oven
Hide thumbs Also See for R-22JT:
Table of Contents

Advertisement

GROUNDING INSTRUCTIONS

GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING
Improper use of the grounding plug can result in a risk of electric shock. The electrical
requirements are 120 Volt, 60 Hz AC only, 20 Amp or more fused electrical supply. It is recommended
that a separate circuit serving only this appliance be provided. When installing this appliance, observe all
applicable codes and ordinances. If it is necessary to use an extension cord, use only a 3-wire extension
cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the appliance.
The marked rating of the extension cord should be AC 120 Volt 20 Amp. Consult a qualified electrician
or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether
the appliance is properly grounded.
Radio or TV Interference
Should there be any interference caused by the microwave oven to your radio or TV, check that the
microwave oven is on a different electrical circuit, relocate the radio or TV as far away from the oven as
feasible or check position and signal of receiving antenna.
Receptacle Box Cover
3-Pronged plug
(NEMA 5-20)
3-Pronged, Receptacle
(NEMA 5-20)
120V 20A
5

Advertisement

Table of Contents
loading

Table of Contents