Sharp R-22JT Operation Manual page 16

1200 watts-heavy duty commercial microwave oven
Hide thumbs Also See for R-22JT:
Table of Contents

Advertisement

CARE AND CLEANING
Oven interior
1) For easy cleaning, wipe any spatters or spills
with a soft damp cloth or sponge at the end of
each day. For heavier spills, use mild soap and
wipe clean with a soft damp cloth.
2) At least once a week, remove the splash cover
and wash in a mild detergent solution. The
splash cover is located in the top of the oven
and may easily be removed. REMEMBER TO
UNPLUG THE POWER CORD.
Remove two thumb screws (A) as shown in
Fig. 1. Then remove the splash cover from the
oven.
To replace the splash cover, insert two projec-
tions of the cover (B) into the holes of the oven
cavity backplate as shown in Fig. 2. And se-
cure the cover to the oven ceiling with two
thumb screws (A) as shown in Fig.1.
3) Wipe any grease, spills or spatters on the door
seal surfaces with a soft damp cloth or sponge
so that they do not build up. The door seals
must always be free of grease and spatters so
that the door closes properly.
Door
Fig.1
(A)
Door
Wipe the door and window on both sides fre-
quently with a soft damp cloth to remove any spills
or spatters. Always keep the door seals and seal
surfaces clean so that any grease, spills or spat-
ters are not allowed to build up. Such a build-up
could result in leakage of microwave energy from
the oven.
Air intake filter
Hole
Clip
Keep the air intake filter clean. Clean at least every
two weeks or more often for heavy use.
Remove the air intake filter by pulling the two (2)
clips on the sides of the filter.
Splash cover
Wash the air intake filter in mild soapy water, rinse
and dry with a soft cloth.
After cleaning re-install the air intake filter.
15
Hole
Clip
Air intake filter
Fig.2
Splash cover
(B)
Hole
Oven

Advertisement

Table of Contents
loading

Table of Contents