Remove And Replace The Speaker - Toshiba TDP-P5 Service Manual

Remove and Replace the Speaker

The speaker fastens to the bottom case. The 200mW, 8-ohm speaker uses a Mylar diaphragm to direct
sound through a grill opening molded into the bottom case.
1 Remove the following items:
Lamp module (see page 7)
Top case (see page 9)
Controller ECA (partial removal) (see page 16)
Optical engine (see page 26)
2 Gently compress one of the speaker retainers on the bottom case. Compress the retainer just
enough to clear the edge of the speaker.
NOTE The retainers are fragile. Avoid excessive force to compress them.
3 With the retainer compressed, use a small flat blade screwdriver to pry the speaker away from
the bottom case.
TDP-P5 Service Manual 30