Remove And Replace The Leveling Foot - Toshiba TDP-P5 Service Manual

Remove and Replace the Leveling Foot

The leveling foot extends from the bottom case and controls the horizontal tilt of the projected image.
The leveling foot retainer stops the leveling foot at its maximum extension.
NOTE A new leveling foot does not include a retainer. The leveling foot retainer is not reusable once you
remove it from the leveling foot.
1 Fully retract the leveling foot into the bottom case.
2 Remove the lamp module (page 7) and the top case (page 9).
3 Gently pry the leveling foot retainer from the groove around the top of the leveling foot.
4 Extend the leveling foot until it separates from the bottom case.
TDP-P5 Service Manual 11