TracVision M5/M7 User's Guide
Chapter 1 - Introduction
System Components
6
The TracVision M5/M7 system includes the following components:
Antenna Unit
The antenna unit houses the antenna positioning
mechanism, LNB (low noise block), and control
elements within a radome. Weathertight
connectors join the power, signal, and control
cabling from the belowdecks units.
Switchplate
The switchplate controls power to the antenna via
the On/Off switch.
MCP (MultiSat Control Panel)
The MCP is the system's user interface, providing
access to the system and its functions through an
LCD with three buttons. The MCP serves as the
system's junction box, and allows you to configure
and operate the antenna.
MAINTENANCE