KVH Industries TracVision R1ST User Manual page 24

TracVision M5/M7 User's Guide
Chapter 2 - Operation
20
Dual-Sat Manual Mode - Required for Three or More Receivers and All
Custom Dual-Sat Setups
Circular TracVision M5/M7 systems with three or more receivers
require the use of a multiswitch. Since multiswitches interfere with
communications between the receivers and the antenna, the system
must be set up in Manual mode. When manual mode is enabled, you
can use the receiver's remote control to change channels on the
currently selected satellite. If you need to switch satellites, simply use
the buttons on the front of the MCP (see Figure 2-13 and Figure 2-14).
You can use the receivers' remote controls to switch between the
channels on the currently selected satellite.
Figure 2-13 Dual-Sat Manual Mode - Receiver/MCP Controls
Antenna
Switchplate
RF2 RF1
Grounding
Block
Multiswitch
Figure 2-14 Dual-Sat Manual Mode - MCP Display
Tracking <Sat A>
<Sat B> Menu
Press for
Sat B
Satellite Being
MCP
Buttons used
to switch satellites
All Receivers
Changes
channels on
current satellite
Tracked