Table of Contents
Advertisement
User's Guide
1. Select Wi-Fi on the home screen.
To select an item, move the focus to the item using the
2. Select Router.
3. Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change to Wi-Fi
connection. or Change Settings to change the settings.
4. Select Push Button Setup (WPS).
5. Hold down the [WPS] button on the wireless router until the security light flashes.
If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
6. Press the OK button on the printer.
7. Close the screen.
The screen automatically closes after a specific length of time.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
8. Close the network connection settings screen.
Network Settings
u d l r
buttons, and then press the OK button.
60
Advertisement
Table of Contents
