Toshiba RAV-SM182UTP-UL Installation Manual page 19

 Wind direction
* Set the wind direction.
CAUTION
Refer to the instructions (for the wind direction
adjustment) in the Owner's Manual supplied with the
indoor unit before setting.
Before setting
1
Push the [ ˄ ] / [ ˅ ] button to select
"1. Wind direction" on the menu screen,
then push the " Set" [ F2] button.
2
Push the [ ˄ ] / [ ˅ ] button to select
the wind direction.
Operation mode Available directions
Heat, Fan,
(1)(2)(3)(4)(5)
Auto (heating)
Cool, Dry,
(1)(2)(3)
Auto (cooling)
3
Push the [ CANCEL] button to return.
The screen returns to the menu screen.
 Turning on/off the louver
swing
To swing the louver
*
* When the louver is stopped,
" Swing ON" is displayed.
35-EN
1
Push the " Swing ON" [ F2]
button on the "Wind direction" screen.
Pushing the [ ˄ ] / [ ˅ ] button on the
"Wind direction" screen while the louver swing
is on stops swinging and sets the wind direction
to (1).
2
Push the [ CANCEL] button.
The screen returns to the menu screen.
To stop the louver swing
*
* When the louver is stopped,
" Swing OFF" is displayed.
1
Push the " Swing OFF" [ F2]
button on the "Wind direction" screen.
 Push the " Swing OFF" [ F2]
button to stop swinging. The louver stops in the
position where the button is pushed.
• The louver does not stop in the position (4) or
(5) when the operation mode is "Cool" or "Dry".
The louver stops in the position (3) even if the
button is pushed when the louver is in the
position (4) or (5)
Display when the louver swing is stopped
• Pushing [ ˄ ] / [ ˅ ] while the display
when the louver swing is stopped appears on
the screen sets the louver in the position (1).
2
Push the [ CANCEL] button.
 The screen returns to the menu screen.
NOTE
• "No function" appears on the display for the models
not equipped with the Wind direction setting.
• " " appears on the display when the Louver lock
function is used. (page 19)
 Individual louver
* For 4-way cassette types, the wind direction and
swing operation of each louver can be set individually.
1
Push the [ ˄ ] / [ ˅ ] button to select
"2.Individual louver" on the menu screen,
push the " Set" [ F2] button.
2
Push the " Louver No." [
button to select the louver to set.
The display changes as follows each time the
button is pushed.
Electrical control
3
box
Refrigerant pipe
4
Drain pipe
1
3
Push the [ ˄ ] / [ ˅ ] button to select
the wind direction.
Refer to "Wind direction" about how to set the
wind direction. (page 18)
4
Push the [ CANCEL] button.
The screen returns to the menu screen.
� 18 �
 Turning on/off the louver
swing
To swing the louver
* When the louver is stopped,
" Swing ON" is displayed.
1
Push the " Swing ON" [
button on the "Individual louver" screen.
2
Push the [ CANCEL] button.
F1]
The screen returns to the menu screen.
To stop the louver swing
* When the louver is stopped,
2
" Swing OFF" is displayed.
1
Push the " Swing OFF" [
button on the "Individual louver" screen.
2
Push the [ CANCEL] button.
The screen returns to the menu screen.
NOTE
• "No function" appears on the display for the models
not equipped with the Individual louver setting.
• Pushing [ ˄ ] / [ ˅ ] while the louver is
swinging stops swinging and sets the louver in the
position (1).
• " " appears on the display when the Louver
lock function is used. Individual louver setting is not
available for the louver set to be locked. (page 19)
*
F2]
*
F2]
EN
36-EN