Table of Contents
Advertisement
To listen to your messages
1 Dial your number.
2 During the OGM press ( ), you'll hear 2 beeps.
3 Enter your 3 digit security code. You will hear 2 beeps. Within 6 seconds:-
Press 7 to hear all messages.
Press 6 to hear only new messages.
Press 9 4 to hear any memo messages.
If no entry is made within 6 seconds, all messages will be played back.
4 After 2-3 minutes the machine will beep and stop. Press 7 to continue.
During playback:
To PAUSE press 7. To continue, press 7 within 15 seconds.
To SKIP BACK to the previous message, press 2.
To SKIP TO the next message, press 5.
To SWITCH day/time stamping on or off, press 1.
To ERASE a message, press 3 during it. To make sure you've heard
it all, it's best to skip backwards (press 2) and erase it when you hear it
again.
To ERASE ALL messages, wait for the machine to say "end of messages"
and then press 3 3. You'll hear 5 beeps.
An 'erased message' isn't erased immediately. It's erased after you hear
"end of messages". Up until this time you can still hear an 'erased message'
again.
ANSWERING MACHINE - REMOTE ACCESS
After hearing your messages, you can do the
following:
TO LISTEN TO ALL MESSAGES AGAIN: press 7.
TO LISTEN TO MESSAGES IN A SPECIFIC MAILBOX press 9 then
the mailbox number (1, 2, 3) or 4 for memos.
TO LISTEN TO MEMOS: press 94 (memos are stored in mailbox 4).
TO LISTEN TO OGMS: press 4 1 (for OGM1) or 4 3 (for OGM2). This
only works for OGMs you recorded yourself, not for the OGMs the
machine comes with.
TO RECORD A NEW OGM: press 4 7 (for OGM1) or 4 9 (for OGM2).
Speak after the 4 beeps, then press 7. Your OGM1 will be played
back. To hear the new OGM again, press 4 1 (OGM1) or 4 3 (OGM2).
Hang-up when you have finished calling your machine.
1 2
Need help?..
Call us on
01707 384438
Advertisement
Table of Contents
