Changing Power Modes - Gateway UC78 Reference Manual

Changing power modes

You can use the following power modes to lengthen
the life of your notebook's battery:
•
•
•
Using power saving modes
Always save your work before using Sleep mode. In
Sleep mode, your notebook reduces or turns off the
power to most devices except memory. However, the
information in memory is not saved to the hard drive.
If power is interrupted, the information is lost.
60
CHAPTER 5: Managing Power
Sleep
- while your notebook is in Sleep mode, it
switches to a low power state where devices,
such as the display and drives, turn off.
Hibernate
- (also called
current memory (RAM) information to the hard
drive, then turns your notebook completely off.
The next time you turn on your notebook, it
reads the memory information from the hard
drive and opens the programs and documents
that were open when you activated Hibernate
mode.
Hybrid Sleep
- while your notebook is in Hybrid
Sleep mode, it switches to a low power state
where devices, such as the display and drives,
turn off similar to Sleep mode. The notebook also
writes all current memory (RAM) information to
the hard drive similar to Hibernate mode. If your
notebook experiences a power outage while in
Hybrid Sleep mode, the notebook reads the
memory information from the hard drive and
opens the programs and documents that were
open when you activated Hybrid Sleep mode. If
the notebook does not experience a power
outage while in Hybrid Sleep mode, it restarts
using the information in current memory, thus
reducing startup time. You must turn on Hybrid
Sleep mode to use it. For more information, see
"Changing advanced settings" on page
save to disk
) writes all
63.