Recalibrating The Battery - Gateway UC78 Reference Manual

4
5
6
7
8

Recalibrating the battery

recalibration is interrupted, you must start the process over again.
If your notebook unexpectedly goes into Sleep mode
while you are using it but the battery charge is not
low, you may need to recalibrate your battery. You
should also recalibrate the battery periodically to
maintain the accuracy of the battery gauge.
programmed into the BIOS. If your notebook does not have this
utility in BIOS, use the non-BIOS procedure.
To recalibrate the battery using BIOS:
1
2
3
4
56
CHAPTER 5: Managing Power
Slide the battery out of the notebook.
Slide a recharged battery into the notebook until
it snaps into place.
Slide the battery lock to the locked position.
Turn your notebook over.
Open the LCD panel.
Important
Do not interrupt the battery recalibration process. If
Important
Select models have the Battery Auto Learning utility
Connect the AC adapter, then turn on your
notebook.
As soon as your notebook starts and you see a
startup screen, press F2. The BIOS Setup utility
opens.
Open the Advanced menu.
Highlight Battery Auto Learning, then select
Enabled by pressing the spacebar.