Table of Contents

Advertisement

Further Functions
Setting the alarm clock signal
¤
¤
q Alarm Clock
§Menu§
Switching off/repeating the alarm after an interval (snooze mode)
Prerequisite: An alarm call sounds.
¤
Deactivate until the next alarm call: Press Off.
Or:
¤
Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after
5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated
after 5 minutes. After the fourth repetition, the alarm call is deactivated for
24 hours.

Baby monitor

When the baby monitor is activated, a call to all internal handsets is activated as soon
as a defined noise level is exceeded in the vicinity of the handset.
In baby monitor mode, incoming calls are only signalled on the display (without
ringtone). The display backlight is reduced to 50%. Advisory tones are deactivated.
If you accept an incoming call, the baby monitor mode is suspended for the duration
of the call, but the function remains activated. The baby monitor mode is not
deactivated by switching the handset off and on again.
a
Ensure the following points:
• The handset should be positioned 1 to 2 metres away from the baby. The
microphone must be pointed towards the baby.
• Activating the function reduces the operating time of your handset. For that
reason, place the handset in the charging cradle if necessary.
• The baby monitor is activated 20 seconds after switching on.
Please always check the functionality and sensitivity when you switch on.
Activating/deactivating and setting the baby monitor
¤
v
Baby Monitor
The baby monitor is deactivated using the display key Off.
Cancelling the baby monitor alarm
Cancelling during a baby monitor alarm: Press a.
34
¤
¤
q Signal
§OK§
¤
§OK§
¤
¤
q (³= on)
§OK§

Advertisement

Table of Contents
loading

Table of Contents