Baby Monitor - Gigaset WIDEX W570 User Manual

Baby monitor

Baby monitor
When the baby monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset.
In baby monitor mode, incoming calls are only signalled on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external number.
Activating and setting the baby monitor
¤
Menu Baby Monitor
If a destination number has already been entered, the baby
monitor is activated with this. The display shows Baby Monitor :
and the specified destination number
If a destination number has not yet been entered:
Activate an External call:
or activate an internal call:
¤
Internal call
Changing the destination number
¤
Menu Baby Monitor
call OK
with External call:
Deactivating baby monitor/cancelling alarm
Deactivating the baby monitor:
Cancelling the baby monitor alarm:
38
OK OK (
OK Enter the number
OK . . . the baby monitor is triggered on all registered handsets
OK Call Target
Insert destination number
¤
In idle status press the display key Off
¤
Press the End call key
= baby monitor activated)
OK
OK select External call or Internal
OK
Baby Monitor :
01230000
Off
during an alarm