Datavideo HS-1600T-2C140TM Instruction Manual page 11

3. HDMI Video Output 1 – 3
Connect to a monitor for Program OUT display or other
HDMI destination devices.
4. USB F/W Upgrade Port
USB port for firmware upgrade. Please refer to the
Firmware Upgrade section for details.
5. TALLY Output Port
Sends Red and Green tally signals to each channel.
Red indicates On-Air, and Green indicates next camera
source. Tally output port can connect other Datavideo
peripheral devices such as ITC-100, ITC-200, AM-100 or
other monitor models, allowing the peripheral device to
communicate with the HS-1600T or send tally signal to be
displayed on the monitor.
6. Audio Input – XLR Balanced (CH1/CH2)
Two channels of XLR Balanced Audio Input.
7. Audio Input – Stereo RCA (Left/Right)
Connects unbalanced analog audio source (stereo).
8. Power Switch
Power switch ON/OFF
9. DC IN
DC in socket connects the supplied 48V / 190W PSU. The
connection can be secured by screwing the outer fastening
ring of the DC In plug to the socket.
11