Table of Contents
Advertisement
Low-Level Control
4.3
Low-Level Control
The Low Level View tab, illustrated in
At any time, the controls in
Control
Register map summary
Write register button
Write all button
Read register button
Read-all button
Load Configuration button
Save Configuration button
Register Data cluster
Individual register cluster with
read or write register buttons
16
Device Configuration
Figure
4-1, allows configuration of the devices at the bit-field level.
Table 4-2
can be used to configure or read from the device.
Table 4-2. Low-Level Controls
Description
Displays the devices on the EVM, registers for those devices, and the states of the registers
• Clicking on a register field allows individual bit manipulation in the register data cluster
• The value column shows the value of the register at the time the GUI was last updated
• The 0-7 column shows the value of the register at the time the register was last read
Write to the register highlighted in the register map summary with the value in the Write Data field
Update all registers shown in the register map summary with the values shown in the Register Map
summary
Read from the register highlighted in the Register Map summary and display the results in the
Read Data field
Can be used to re-synchronize the GUI with the state of the hardware
Read from all registers in the Register Map summary and display the current state of the hardware
Load a configuration file from disk and register address/data values in the file
Save a configuration file to disk that contains the current state of the configuration registers
Manipulate individual accessible bits of the register highlighted in the register map summary
Perform a generic read or write command to the device shown in the Block drop-down box using
the address and write data information
Figure 4-1. Low-Level Register Control Tab
Copyright © 2020, Texas Instruments Incorporated
www.ti.com
SLAU796 – July 2020
Submit Documentation Feedback
Advertisement
Table of Contents
