Other Basic Operations; Display; Off Timer; Picture Mode - Fujitsu Plasmavision P42XTA51US User Manual

OTHER BASIC OPERATIONS

DISPLAY


Press .
Press this button to display the Program No., input
mode, and screen size status.

OFF TIMER

This function allows you to set the length of time before
the plasma display automatically goes into standby
state.

Press .
The standby state is placed when the set time has
passed.
Each time the button is pressed, the time setting is
switched as shown below.
30min.60min.90min.120min.
off

PICTURE MODE

This function switches the picture mode.

Press .
Each time the button is pressed, the mode is switched
between the current picture mode and Fine mode.
* See P. E-25 for how to set PICTURE MODE.
* While you are watching pictures in Fine mode,
pressing the button does not switch the mode.

PICTURE MEMORY

This function calls pictures which have been adjusted
and registered. This button toggles among eight preset
picture adjustment groups loaded into memory.

Press .
Each time the button is pressed, the picture memory is
switched as shown below.
Memory1Memory2Memory3
Memory4Memory5Memory6
Memory7 Memory8
* See P. E-28 for how to set PICTURE MEMORY.
Note
• Displaying a 4:3 picture in Normal mode for extended periods of time may cause burn-in.
• A variety of Screen Sizes are available with this plasma display. Remember that if you select a mode with an aspect ratio (ratio of frame width to
frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the
same aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
• In order to avoid copyright infringement, select a mode having the same aspect ratio as the original picture.

WIDE

This function switches among available picture display
modes.
1

Press .
The currently selected mode will appear.
Normal mode
2

Press to select a desired display
mode.

Each time you press
appears. Here are the display mode sequences.
TV mode
NormalWide1Wide2Zoom1
Zoom2
Video mode
NormalWide1Wide2Zoom1
Zoom2
RGB mode
NormalWideZoom
* Depending on the type of signal, some aspects may
not be selected.
* See P. E-29 for how to adjust the display size and
position.
* The buttons on the plasma display can also be used
for adjustments and settings.
, a different display mode
E-21