Attaching The Ferrite Cores - Fujitsu Plasmavision P42XTA51US User Manual

ATTACHING THE FERRITE CORES

The ferrite cores are used to reduce noise. Attach them correctly as shown in the following illustrations.
Be sure to turn off power of the plasma display and external equipment before making any connections.
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.
Two large ferrite cores
When connecting the cord to the power input terminal, RS232C input terminal, attach one of these ferrite cores to the cord and the cable
near the terminal.
Power Cord RS232C Cable
Ferrite Core
Ferrite Core
Two small ferrite cores
When connecting a cable to the external speaker output terminal, attach a ferrite core to the cable near the terminal.
Note
• Cables for connecting the plasma display to external equipment are not supplied. Contact your dealer for more information on these products.
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
E-14