WATCHING TV, VIDEO, OR PICTURES ON PC
TV
Select the TV mode to watch TV programs.
1
Press
.
Terrestrial TV programs or cable TV programs are
available. The last program No. that you watched is
received.
2
Press
to watch terrestrial
programs. Press
TV programs.
3
Select a desired Program No.
There are two methods to select a Program No.
・ Using
-
, or
・ Using
or
CH RETURN
The program can be toggled back to a previous channel,
video input or RGB input.
Press
.
The program reverts to the channel viewed immediately
before the present channel. If the previous content was
from another video input, the video mode reverts to that
input.
ANTENNA/CABLE
Terrestrial or cable TV broadcastings can be selected.
Press
.
The Antenna In signal is selected.
Press
.
The Cable In signal is selected.
About Auto Lock (Parental Lock)
• Auto Lock is provided for parents to determine that TV programs and video pictures not good for their children are blocked.
• Restrictions on the watching of TV programs can be placed by channel, age, and program category.
• For details, see "Auto Lock (Parental Lock) Setting" on P. E-36.
E-18
to watch cable
VIDEO
Select the video mode to watch pictures through video
inputs.
Press
.
Each time this button is pressed, the video input mode is
switched to the next one. The video input mode can
also be switched directly by pressing
number button on the remote control.
View when the Video1 mode is selected
* For the settings of input terminals, see "EXAMPLE
OF CONNECTING EXTERNAL EQUIPMENT"
(P. E-16) and "Audio Input" (P. E-38).
RGB
Select the RGB mode to watch pictures through the
RGB input.
Press
.
The RGB input mode is selected.
View when the RGB1 mode is selected
* For the settings of input terminals, see "EXAMPLE
OF CONNECTING EXTERNAL EQUIPMENT"
(P. E-16), "Selecting the settings of D-Sub Input
terminal" (P. E-32), and "Audio Input" (P. E-38).
and then the