Table of Contents
Advertisement
BASIC OPERATIONS
TURNING ON THE POWER
TURNING OFF THE POWER
Note
• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director's original intentions to be preserved.
Reference
See P. E-12–E-13 for how to adjust the picture size and position.
* Functions may not be available with some models and some device options.
E-8
Set the OFF/STD-BY
1
the bottom of the display to STD-
BY
.
The power indicator lamp turns red.
Press
on the remote
2
control.
When you do so, the power indicator lamp turns
green.
3
Press
or
desired input mode.
Press
when the power is ON.
The power indicator lamp turns red.
switch at
to select a
Advertisement
Table of Contents
