Table of Contents
Advertisement
Quick Links
USER'S MANUAL
42" WIDE PLASMA DISPLAY
P42HHS10W/P42HHS10A
SELECTOR FOR
42" WIDE PLASMA DISPLAY
P-SU4H10W/P-SU4H10A
Before Use
• Safety Precautions ··································· E-2-E-3
• Features ····························································E-4
• Accessories ······················································ E-5
• Handy Tips ······················································· E-5
• Installation ······················································· E-6
Usage
• Part Names and Functions ···················· E-7-E-12
• Using the Remote Control ··················· E-13-E-14
······························································· E-15-E-23
• Basic Operations ·································· E-24-E-25
• Selecting Input Mode ·····································E-26
• Other Basic Operations ································· E-27
······························································· E-28-E-29
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
Contents
Page
• Adjustment Menu ········································· E-30
• Adjusting Pictures (PICTURE Menu) ··· E-31-E-33
(POSITION/SIZE Menu) ························ E-34-E-35
• Adjusting AUDIO (AUDIO Menu) ········ E-36-E-37
······························································· E-38-E-44
VALUE (FACTORY DEFAULT) ························ E-45
Others
• Options ····························································E-46
• Factory Settings ············································ E-47
• Specification ········································· E-48-E-49
• Cleaning and Maintenance ····························E-50
Page
Advertisement
Table of Contents
Related Manuals for Fujitsu Plasmavision P42HHS10W
Summary of Contents for Fujitsu Plasmavision P42HHS10W
-
Page 1: Table Of Contents
USER’S MANUAL 42” WIDE PLASMA DISPLAY P42HHS10W/P42HHS10A SELECTOR FOR 42” WIDE PLASMA DISPLAY P-SU4H10W/P-SU4H10A Contents Page Page Before Use Adjustments • Safety Precautions ··································· E-2–E-3 • Adjustment Menu ········································· E-30 • Features ····························································E-4 • Adjusting Pictures (PICTURE Menu) ··· E-31–E-33 •... -
Page 2: Safety Precautions
PRODUCT TO RAIN OR MOISTURE. FCC NOTICE • P42HHS10W/P42HHS10A: A Class B digital device • P-SU4H10W/P-SU4H10A: A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 3 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.
-
Page 4: Features
FEATURES Variety of input signals • The unit features four video and four S-video input terminals, and five component video terminals. • In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high definition picture quality. -
Page 5: Accessories
ACCESSORIES CHECKING ACCESSORIES Selector Section One remote control Two AA batteries One power cable (42”W Type) (42”A Type) Display Section One user’s manual One power cable Two ferrite cores One System cable One System cable (picture) (audio) Manual (42”W Type) (42”A Type) HANDY TIPS •... -
Page 6: Installation
INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation. -
Page 7: Part Names And Functions
PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT 1 Power indicator lamp (Right section) This lamp shows the state of the power supply. Lit (red): Stand-by Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON (See P. E-42.) Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. - Page 8 PART NAMES AND FUNCTIONS (Continued) DISPLAY SECTION – LOWER PART power switch When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ”...
- Page 9 SELECTOR SECTION – FRONT 1 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON (See P. E-42.) Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-50 for more information.) 2 Remote control signal receiver Receives signals from the remote control.
- Page 10 PART NAMES AND FUNCTIONS (Continued) SELECTOR SECTION – REAR VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 AUDIO AUDIO OUTPUT INPUT DIGITAL1 DIGITAL2 DIGITAL VIDEO1 VIDEO2 VIDEO4 COMPONENT VIDEO COMPONENT VIDEO COMPONENT VIDEO PICTURE VIDEO5 VIDEO1 RGB2 INPUT COMPONENT VIDEO COMPONENT VIDEO mD-sub RGB1 PICTURE...
- Page 11 Description of Input Terminals DVI-D terminal (RGB 1 INPUT/DVI-D) RGB2 input terminal (RGB2, 3 INPUT/mD-sub) Pin No. Input signal Pin No. Input signal — Green Ground Blue — — — Ground Horizontal synchronization Ground Vertical synchronization Ground — Ground Frame Ground E-11...
-
Page 12: Remote Control
PART NAMES AND FUNCTIONS (Continued) REMOTE CONTROL For details, see page button 2 STILL button Switches between power ON and standby Displays a still picture during viewing. state. 3 MUTE button 4 DISPLAY OFF button Temporarily mutes the sound. For showing on-screen-information. 6 PICTURE MEMORY button 5 PICTURE MODE button Recalls the PICTURE MEMORY. -
Page 13: Using The Remote Control
USING THE REMOTE CONTROL PUTTING BATTERIES IN THE REMOTE CONTROL 1 To remove the cover, slide it 2 Place two AA batteries in the 3 Close the cover until it snaps into outwards while pressing it down. remote control. Make sure that the place. -
Page 14: Effective Range For The Remote Control
USING THE REMOTE CONTROL (Continued) EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. Left Right 5 m (Front) Left... -
Page 15: Connecting The Display To External Equipment
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. - Page 16 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) BASIC SYSTEM CONNECTIONS Display Speaker (optional) 3-pin outlet 3-pin outlet Selector 1. Connect the following items to the selector and the display 1 Selector and display Connect these two with the provided system connection cable. (For details, see the page on the right.) 2 Speakers For how to connect speakers, see the instructions provided with the speakers.
- Page 17 CONNECTING THE DISPLAY AND THE SELECTOR Rear side of display Left speaker cable Right speaker cable Black Power input Display input terminal Audio Picture terminal terminal To AC outlet VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 AUDIO AUDIO OUTPUT INPUT DIGITAL1 DIGITAL2 DIGITAL VIDEO1...
- Page 18 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Speaker (optional) Speaker Display Remote control Selector VCR or other external components See P. Satellite tuner Video camera DVD player Videogame machine Amplifier E-18...
- Page 19 • Connect the video signal cable to either the S-video input terminal or the video input terminal. To S-video output To video output To audio outputs To video input To audio inputs VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 AUDIO AUDIO INPUT OUTPUT...
-
Page 20: Dvd Player
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) DVD PLAYER • Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. • If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal. - Page 21 SATELLITE TUNER • Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. • If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
- Page 22 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) VIDEO CAMERA • A video camera can conveniently be connected to the Video 3 input on the front side. • Connect the video signal cable to either the S-video input terminal or the video input terminal. •...
- Page 23 • As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. • The PC can be connected to either the front side or the rear side, whichever is most convenient. To RGB output (mD-sub) To audio output To RGB3 input...
-
Page 24: Basic Operations
BASIC OPERATIONS TURNING THE POWER ON AND OFF Press OFF/ON to the left at the bottom of the display and the left at the bottom of the selector to the STD-BY state. The power lamp lights up. Press on the remote control. The color of the power lamp changes from “Red”... -
Page 25: Adjusting The Volume
ADJUSTING THE VOLUME Press the Volume button Press to increase the volume. Press to reduce the volume. Any value between 0 and 40 can be selected. * Note that the volume level remains stored even when you turn OFF the power. When the volume adjustment button is pressed Muting the sound Press... -
Page 26: Selecting Input Mode
SELECTING INPUT MODE VIDEO INPUT MODE Press the – buttons to select the input mode. You can select from VIDEO 1 mode to VIDEO 6 mode. The video modes corresponding to each input terminal are as follows. • VIDEO1: Video, S-video, Component video Video1 mode •... -
Page 27: Other Basic Operations
OTHER BASIC OPERATIONS CONVENIENT FUNCTIONS Still Picture (STILL) Press The currently viewed scene can be viewed as a still picture. Convenient when you want to take a note, etc. Press again to return to the normal picture. On-screen information showing the channel, etc. (DISPLAY) Press The channel or mode is indicated on the screen for 5 seconds. -
Page 28: Watching Pictures On The Wide Screen
WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES Press The currently selected mode will appear. Press to select a desired picture mode. Normal mode Each time you press , a different picture mode appears. The sequences used are as follows: When you are in a Video or S-video input mode When you are in a Comp.video input mode When you are in an RGB input mode... -
Page 29: Screen Size
SCREEN SIZE Normal Displays pictures of normal size (i.e., a 4:3 aspect ratio). Auto The screen size changes automatically in accordance with the contents of image software you use. Wide1 Displays natural-looking pictures of standard size on the wide screen. Picture of Wide1 standard size... -
Page 30: Adjustments
ADJUSTMENT MENU ADJUSTMENT MENU PICTURE Contrast MENU Brightness POSITION/SIZE AUDIO Color FEATURES Tint FACTORY DEFAULT Sharpness Picture Mode PrecisionSetting Luminance Can be set when Fine is selected as the Picture Mode. Noise Reduction * Black Level Colour Temp. Picture Memory User Colour Temp. -
Page 31: Adjusting Pictures (Picture Menu)
ADJUSTING PICTURES (PICTURE MENU) BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)] You can make changes to all picture adjustment options in the PICTURE Menu. The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any changes. - Page 32 ADJUSTING PICTURES (PICTURE MENU) (Continued) • Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart. Select the item with , and then adjust with . Finally, press to implement the adjustments. Adjustment Item Adjustment Range/Remarks Contrast Lower contrast...
- Page 33 • Setting Noise Reduction (Noise Reduction) Can select the noise reduction setting corresponding to the noise level of the input signal. Each time you press ,one of the available choices appears in the following sequence: Off: Noise reduction does not function. Min.: Weak setting Std.: Standard setting Max.: Strong setting...
-
Page 34: Adjusting Screen Position And Size (Position/Size Menu)
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION] You can make changes to all screen adjustment options in the POSITION/SIZE Menu. The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes. - Page 35 Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. → : Moves screen to the left. → “Position” adjustment screen Vertical position (Vertical) : Moves screen up. → : Moves screen down. → Press to store. Adjusting Screen Size (Size) Screen width (Width) →...
-
Page 36: Adjusting Audio (Audio Menu)
ADJUSTING AUDIO (AUDIO MENU) BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)] You can make changes to all sound adjustment options in the AUDIO Menu. The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes. - Page 37 Adjusting Treble (Treble) Any value between -6 and +6 can be selected. : Stronger treble : Weaker treble Adjusting Bass (Bass) Any value between -6 and +6 can be selected. AUDIO Menu screen : Stronger bass : Weaker bass Adjusting Volume Balance (Balance) Any value between -10 and +10 can be selected.
-
Page 38: Other Adjustments (Features Menu)
OTHER ADJUSTMENTS (FEATURES MENU) BASIC OPERATION [EX. : SELECTING LANGUAGE (Language)] You can make the following changes in the FEATURES Menu. Press The main menu screen will appear. Press to select “FEATURES”. Each time you press or , one of the available “FEATURES”... - Page 39 • FEATURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Allows setting of 24-frame mode and Jaggies filter. (See P. E-40.) On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-40–E-41.) Input Terminal : Can make an input terminal setting such as Video Input.
-
Page 40: On Screen Menu
OTHER ADJUSTMENTS (FEATURES MENU) (Continued) FUNCTION • Displaying the optimum movie pictures (24 Frame Mode) for Video Can make the optimum display of 24 frames/second signals such as movie pictures. Each time you press , one of the available choices appears in the following sequence: On : Displays the optimum movie pictures. -
Page 41: Setting The Input Terminals
• Selection of indications You can change the settings for indications for video inputs and RGB inputs. Video input You can change the settings for indications for the VIDEO1 – 6 inputs. Select the desired indication in accordance with the connected equipment. Each time is pressed, the setting is switched. -
Page 42: Other Settings
OTHER ADJUSTMENTS (FEATURES MENU) (Continued) OTHER SETTINGS • Power saving settings Function to prevent the TV from staying on if you forget to turn it off. Auto Off-UNTOUCH Each time is pressed, the setting is switched. Off: Power is not turned off automatically. On: If no operation has taken place for 3 hours, the power supply is automatically placed in the Power saving settings screen (RGB mode) standby mode. - Page 43 • Minimizing phosphor burn-in (Screen Orbiter) for RGB You can use this option to move the screen position to minimize phosphor-induced “burn-in”. Follow the steps below. (1) Select “Screen Orbiter” and press The “Screen Orbiter” setting screen will appear. (2) Press to select “Mode/Time”.
- Page 44 OTHER ADJUSTMENTS (FEATURES MENU) (Continued) • Specifying RGB Input Signal (Code Setting) for RGB2, RGB3 You can use this option to specify and display the type of RGB input signal by code number. Each time you press , one of the available choices appears in the following sequence: Auto Manual...
-
Page 45: Initialization Of User Adjustment Value (Factory Default
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT) You can restore the values of the adjustment/setting made in the MENU to factory settings. Press The main menu screen will appear. Press to select “FACTORY DEFAULT”. “FACTORY DEFAULT” selected in the main menu screen Each time you press or , one of the available menus appears in the following sequence:... -
Page 46: Options
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer. CAUTION: This display (P42HHS10) is for use only with Fujitsu General Limited’s option (P-WB4200, P-CT4200, P-TT4200). Using this display with other option can cause instability resulting in possible injury. -
Page 47: Factory Settings
FACTORY SETTINGS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-34–E-35 to adjust the parameters. -
Page 48: Specification
SPECIFICATION Selector Model P-SU4H10W/P-SU4H10A Weight 4.5 kg / 9.9 lbs Outer dimensions 43.0 (W) x 9.5 (H) x 37.0 (D) cm / 16.9 (W) x 3.7 (H) x 14.6 (D) inch Power supply 110–240 VAC 50/60 Hz Current rating 0.4 A External equipment terminals Pin jack 1.0 Vp-p/75 Ω... - Page 49 EMC: AS/NZS 3548 • Specifications and external appearance may be change for the sake of improvement. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. E-49...
-
Page 50: Cleaning And Maintenance
CLEANING AND MAINTENANCE Precautions Cleaning the Cabinet and Remote Control Be sure to remove the power plug from the receptacle before Use a soft cloth for cleaning. cleaning the display. If the cabinet or remote control is heavily stained, soak a soft cloth Be sure not to clean the display using a cloth dampened with in a mixture of water and detergent and squeeze it dry before volatile solvents, such as benzene or thinner.