Adjusting Screen Position And Size (Position/Size Menu); Position; Size - Fujitsu Plasmavision P42XTA51US User Manual

ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)

• You can make changes to all screen adjustment options in the
POSITION/SIZE Menu.
• See Page E-24 for the basic procedures.
POSITION/SIZE Menu screen
• The changes you make will be stored for the selected input
mode. Therefore, you need to select a desired input mode
before making any changes.
• The adjustment range may vary depending on the input
signal.

Position

"Position" adjustment screen
Horizontal position (Horizontal)

: Moves the screen picture to the right.

: Moves the screen picture to the left.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available. (The adjustment screen may also vary slightly.)
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
Vertical position (Vertical)

: Moves the screen picture up.

: Moves the screen picture down.

Press to store.

Size

"Size" adjustment screen
Screen width (Width)

: Increases the width.

: Reduces the width.
Screen height (Height)

: Increases the height.

: Reduces the height.

Press to store.
E-29