Tuner Setting (Tv); Channel Setting; Channel Edit; Auto Scan - Fujitsu Plasmavision P42XTA51US User Manual

Tuner SETTING (TV)

The tuner setting procedure is as follows:
"Tuner" Screen
 
Press or to select a target item below.
Channel Setting  CableCARD  Reboot 
Emergency Alert

Press to move on to the next step.

Channel Setting

"Channel Setting" Screen
 
Press or to select a target item below.
Auto Scan  Channel Edit  D Audio Program 
Audio Compression  D Audio Format 
Fact Ch Reset

Press to move on to the next step.

Auto Scan

"Auto Scan" Screen
Searches automatically for available channels.
 
(1) Press or to select Antenna/Cable.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model, or the types of signals, some of the functions may not be available.
• The adjustment range varies depending on the display signal. Adjust to a desired picture quality in the allowable adjustment range.
• Setting and adjustment may be disabled depending on the signal type.
 
Press or to select the scan item of a receiving
channel.
- Antenna
Antenna:  None  Antenna 
[Antenna]: Scans terrestrial channels.
[None]: No scanning.
- Cable
Cable:  None  Standard  HRC  IRC 
[Standard]: Scans channels in standard mode for cable
TV broadcastings.
[HRC]: Scans channels in Harmonically Related Carrier
mode for cable TV broadcastings.
[IRC]: Scans channels in Incrementally Related Carrier
mode for cable TV broadcastings.
[None]: No scanning.
･ In the item of "Cable", set to "Standard" usually.
･ Please set HRC and IRC only when required from your
cable TV provider.
(2) Execute
 
Press or to select Execute.

Press to start Auto Scan.
After all the channels are scanned, only receivable
channels are input into the channel list.
* Scanning all the channels may take many minutes. To
stop the scanning halfway, press

Channel Edit

"Channel Edit" Screen
This function displays channels scanned by Auto Scan or
channels registered with FAVORITE. When
operated, the function also determines whether to select the
channel.
 
Press or to select a target channel.
 
Press or to switch between the items.
 Add  Skip 
[Add]: Selects a channel.
[Skip]: Disables channel selection.

Press to store.

.

is
E-33