6.2 Error Indications in the Operator Panel(2)
fi-5120C / fi-5220C Image Scanner Operator Guide
6.2 Error Indications in the Operator Panel (2)
Device alarms:
Indication
E0
Flatbed motor malfunction.
E1
Trouble in the optical system (Flatbed).
E2
Trouble in the optical system (front).
E3
Trouble in the optical system (back).
E4
The motorfs fuse has blown out.
E6
Trouble in the operator panel.
E7
Trouble occurred in the EEPROM.
E8
The SCSI interface fuse has blown out.
E9
An error in the image memory.
EA
Trouble with the imprinter.
Ec
An alarm in the memory.
Ed
Trouble with the SCSI interface controller.
EF
Trouble with the background switching mechanism.
file://///Hd-htgle21/Manual/fi-5120C_5220C-lynx2/OG/R03/contents/EN/06/c06_02_02.htm2006/08/29 16:01:31
1
Meaning
1
All Rights Reserved Copyright 2006 © PFULIMITED
2
When you encounter any alarm on the display, turn
the scanner off and on. If the alarm is still displayed
on the Function Number display, contact the store
where you purchased the scanner or an authorized
FUJITSU scanner service provider.
2
TROUBLE SHOOTING
CONTENTS MAP
TOP
Remedy