Fujitsu FI-5220C Operator's Manual page 141

7.2 Document Quality(2)
fi-5120C / fi-5220C Image Scanner Operator Guide
7.2 Document Quality (2)
ATTENTION
This scanner can scan ID cards through the Automatic Document Feeder with the following precautions.
Place one card at a time into the Auto Document Feeder.
●
ID card feeding requires the card to be fed through the Auto Document Feeder in portrait mode as
●
in the following figure.
Smooth cards should be placed face down in the Auto Document Feeder.
●
Embossed cards (raised lettering) should be placed with the embossed side down.
●
The card to be scanned should be within the ISO7810 compliance, type ID-1.
●
ISO7810-compliant, Type ID-1 card
Material:
Dimensions:
Thickness:
Cards that are excessively rigid or less flexible may not feed smoothly and excessive noise may
●
occur.
Cards should be clean from oil and without labels.
●
Cards cannot be scanned when the imprinter is installed.
●
file://///Hd-htgle21/Manual/fi-5120C_5220C-lynx2/OG/R03/contents/EN/07/c07_02_02.htm2006/08/29 16:02:00
1
PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)
3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm
0.03 ± 0.003inch / 0.76 ± 0.08mm
1
All Rights Reserved Copyright 2006 © PFULIMITED
TROUBLE SHOOTING
CONTENTS MAP
TOP
2
2