Power Save Mode - Fujitsu FI-5220C Operator's Manual

2.1 Turning the Scanner ON (6)
fi-5120C / fi-5220C Image Scanner Operator Guide
2.1 Turning the Scanner ON (6)

Power Save Mode

The Power Save mode keeps the scanner in a low-powered state after it has been turned ON.
If no operation is performed on the scanner for 15 minutes, the scanner automatically switches to the Power Save mode.
In the Power Save mode, the indication of the Function Number display on the operator panel goes out, but the green LED
stays lit.
To return from the Power Save mode, perform one of the following:
Load the document on the ADF paper chute.
●
Press any button on the operator panel.
●
The scanner will be turned OFF when pressing down the power button for at least two seconds.
Execute a command from the scanner driver.
●
file://///Hd-htgle21/Manual/fi-5120C_5220C-lynx2/OG/R03/contents/EN/02/c02_01_06.htm2006/08/29 15:59:51
1 2 3
1 2 3
All Rights Reserved Copyright 2006 © PFULIMITED
TROUBLE SHOOTING
CONTENTS MAP
TOP
4 5
6
4 5
6