Fujitsu FI-5220C Operator's Manual page 126

6.3 Remedying Typical Troubles
fi-5120C / fi-5220C Image Scanner Operator Guide
6.3 Remedying Typical Troubles
Symptom: Multi feed errors occur frequently.
Back
Do the documents satisfy the conditions
described in "7.2 Document
When the multi feed detection is ON, are the
multi feed detection conditions satisfied?(*2)
Were the documents fanned before loaded
onto the ADF paper chute?
Have you scanned a very thick paper or plastic
document?
Have the documents just been printed out on a
copier or laser printer?
Is the document stack 5 mm or less?
Are all the consumables (Pick roller and Pad
ASSY) installed correctly?
file://///Hd-htgle21/Manual/fi-5120C_5220C-lynx2/OG/R03/contents/EN/06/c06_03/09.htm (1/2)2006/08/29 16:01:42
Quality"?
YES
YES
YES
NO
NO
YES
Use documents that satisfy the requirements.
(*1)
NO
Satisfy the multi feed detection conditions. (*2)
NO
Fan the document before loading, or reduce
the number of sheets of the documents.
NO
When scanning documents like this, disable
the multifeed detection.
YES
Fan the documents 3 or 4 times to remove
static electricity from the paper.
YES
Reduce the number of sheets of the document.
(*3)
NO
Correctly install the consumables if needed.
NO
TROUBLE SHOOTING
CONTENTS MAP
TOP