Fax Problems; Unable To Send A Fax - Oki MC573dn User Manual

Fax Problems

This section describes problems with the fax function.
If you cannot solve a problem with the following solutions, contact your dealer.
•

Unable to Send a Fax

• Unable to Receive a Fax
• Unable to Send or Received a Fax (Advanced Manual)
• Other Problems (Fax) (Advanced Manual)
• Fax Error Codes (Advanced Manual)
Unable to Send a Fax
• Unable to send a fax
Point to check
Did you send in the correct
procedure?
Did you specify the correct fax
number?
Did you specify the appropriate dial
type?
Has any problem occurred at the
recipient machine?
Is the error code [23] marked on the
Transmit/Receipt Journal?
Is the error code [26] marked on the
Transmit/Receipt Journal?
- 202 -
Solution
Check the procedure, and then try
Entering Fax Number to Send a
again.
Fax
If you are using speed dial, print the
Entering Fax Number to Send a
speed dial list to check the
Fax
registration.
Specifying a Destination from
Phone Book (Advanced
Manual)
Specifying a Destination Using
One-touch Button (Advanced
Manual)
Specifying a Destination from
Transmission History and
Reception History (Advanced
Manual)
Specify the appropriate dial type for
User Install (Advanced Manual)
your region.
Press [Device Settings] on the touch
panel, select [Admin Setup] > [User
Install] and set the value according to
your environment in [MF (Tone)/DP
(Pulse)].
Ask the recipient to have the -
recipient's machine ready for
reception.
Press [Device Settings] on the touch
Checking the Information of the
panel, select [Admin Setup] > [User
Machine (Advanced Manual)
Install], and then set [MF(Tone)/
DP(Pulse)] depending on your
User Install (Advanced Manual)
environment.
Press [Device Settings] on the touch
Checking the Information of the
panel, select [Admin Setup] > [Fax
Machine (Advanced Manual)
Setup] > [Fax Setting], and then
change the setting for [PBX Line].
Administrator Setup (Advanced
Manual)
9. Troubleshooting
Reference