Oki MC573dn User Manual page 212

Access Limitation Error. Monochrome printing was performed due to the color printing
limitation.
A color print job was converted to a mono print job due to an unauthorized user. Contact your administrator for color
printing.
Access Limitation Error. Data was deleted due to the color printing limitation.
A color print job was deleted due to an unauthorized user. Contact your administrator for color printing.
Restricted access error. Data deleted due to printing restrictions.
A print job was deleted due to an unauthorized user. Contact your administrator for printing.
Incompatible USB device connected. Remove the connected USB device.
An unsupported USB device is connected. Remove the USB device.
Please remove the connected USB device. USB device has not been recognized.
The connected USB device was not recognized. Remove the USB device.
Please remove the USB Hub. USB Hub is connected.
A USB hub is connected. Remove the USB hub. This machine does not support USB hub.
Inspection is required. SIP Error
Turn off the machine, and then back on. If the same error occurs, contact your dealer.
Job Log Database Error
A data base access error has occurred while writing or reading the job log. Turning off and on the machine may
resolve the problem.
To erase the message, press [Close].
Job Log Buffer Full(Delete old logs)
Old job logs were deleted, because job log buffer was full.
A decoding error occurred. Check the image data.
An error has occurred in the image data sent to this machine. Check the image data.
Process has been canceled as there is no space on the device. Please free up enough
memory space by reducing usage and try again.
Processing data was cancelled due to memory full.
Press the (Status) button and check if printing data remains on the machine. Delete the data if any data
remains.
Remaining private printing data can be deleted only by someone who set the password and the administrator.
If an error occurs while scanning or faxing, change the scan settings to prevent the data amount from being large.
Process has been canceled by a device error. After maintenance or change of the
device, please try again.
Processing data was cancelled because an error occurred on the machine.
Contact your dealer.
Access denied to PC. Please check PC.
Connecting to a computer failed when performing Scan to Computer. Check the settings on the computer.
Scan To Computer Problems (Advanced Manual)
Deleting data.
This machine ran out of color toner. Color print data is being deleted.
Wait for a while.
Color toner empty. Job cancelled.
This message indicates that the color print job was cancelled because toners other than black are empty. Press
[Close] to exit the status window.
Error PDF
The PDF file is damaged.
Check the file.
- 212 -
9. Troubleshooting