Dukane 6650WSSA User Manual page 64

Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
[LIGHT MODE]
Adjusting the energy savings settings and the brightness of each projector in multi-screen projection. For energy sav-
ings settings, see page
ECO MODE OFF
ECO1
ECO2
ADJUST
CONSTANT OFF
BRIGHTNESS
ON
TIP:
• Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, the projector automatically adjust
the output based on the projector used time, thereby maintaining a constant brightness throughout the life of the light module.
However, if output is already at its maximum, brightness will decrease with use.
28 "4 Changing Eco Mode/Checking Energy-Saving Effect".
The light module luminance (brightness) will be at the setup brightness for [ADJUST].
By controlling the brightness and fan speed according to the selected setting, energy can
be saved and motion noise and the power consumption can be lowered.
Can be selected when [CONSTANT BRIGHTNESS] mode is set to [OFF].
Brightness can be adjusted in 1% increments from 16 to 100%.
When several projectors are used for multi-screen projection, the brightness can be ad-
justed individually on each projector.
The adjustment is valid when [ECO MODE] is set to [OFF] and [CONSTANT BRIGHT-
NESS] is set to [OFF].
[CONSTANT BRIGHTNESS] mode will be canceled.
Maintains 80% brightness of the factory default setting.
NOTE:
• [CONSTANT BRIGHTNESS] mode is a function used to maintain the brightness at a constant
level. Color will not be fixed.
51
4. Using On-Screen Menu