Dukane 6650WSSA User Manual page 35

4. Press the ▲ button to select [HORIZONTAL] and then use the ◀
or ▶ so that the top and bottom sides of the projected image are
parallel.
• Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone distortion.
6. After completing Keystone correction, press the EXIT button.
The Keystone screen will disappear.
• To perform Keystone correction again, press the ▼ button to display
the Keystone screen and repeat above steps 1 to 6.
To return the keystone adjustments to default:
1. Press the ▼ button to select [RESET] and press the ENTER button.
2. Press the ◀ or ▶ button to select [YES] and press the ENTER button.
The adjustments will be reset.
• When resetting, the [HORIZONTAL] and [VERTICAL] adjustment values are also reset.
• The KEYSTONE feature can cause an image to be slightly blurred because the correction is made electronically.
2. Projecting an Image (Basic Operation)
22