Dukane 6650WSSA User Manual page 28

Selecting Default Source
You can so that it will be displayed each time the projector is turned on.
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button twice to select [SETUP] and the ▼ button or the ENTER button to select [GENERAL].
3. Press the ▶ button four times to select [OPTIONS(2)].
4. Press the ▼ button five times to select [DEFAULT SOURCE SELECT] and press the ENTER button.
The [DEFAULT SOURCE SELECT] screen will be displayed.
(→ page 62)
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
7. Restart the projector.
The source you selected in step 5 will be projected.
TIP:
• When the projector and computer are connected and the projector is in standby, it is possible to turn on the projector's power
and project the computer's screen automatically by detecting the computer signals or HDMI signals issued from the computer.
([AUTO POWER ON] → page 61)
• On Windows 7, a combination of the Windows and P keys allows you to set up external display easily and quickly.
2. Projecting an Image (Basic Operation)
15