Dukane 6650WSSA User Manual page 120

NOTE:
• When [COMPUTER] is selected from your source selection, the Virtual Remote screen or the toolbar will be displayed as well as
your computer screen.
• Use the supplied computer cable (VGA) to connect the COMPUTER IN terminal directly with the monitor output terminal of the
computer to use Virtual Remote Tool.
Using a switcher or other cables than the supplied computer cable (VGA) may cause failure in signal communication.
VGA cable terminal:
Pin Nos. 12 and 15 are required for DDC/CI.
• Virtual Remote Tool may not work depending on your computer's specifications and version of graphic adapters or drivers.
• To run Virtual Remote Tool on Windows 8.1 and Windows 8, "Microsoft .NET Framework Version 2.0" is required. The Microsoft
.NET Framework Version 2.0, 3.0 or 3.5 is available from Microsoft's web page. Download and install it on your computer.
• Logo data (graphics) that can be sent to the projector with Virtual Remote Tool has the following restrictions:
(Only via serial connection)
- File size: Less than 768 KB
- Image size (resolution):
6650HDSSA: Horizontal 1920 × vertical 1080 dots or less
6650WSSA:
Horizontal 1280 × vertical 800 dots or less
TIP:
• The projector's COMPUTER IN terminal supports DDC/CI (Display Data Channel Command Interface). DDC/CI is a standard
interface for bidirectional communication between display/projector and computer.
• With the Virtual Remote Tool, control is possible with both network (wired/wireless LAN) and serial connections.
Step 1: Install Virtual Remote Tool on the computer
NOTE:
• To install Virtual Remote Tool, the Windows user account must have "Administrator" privilege.
• Exit all running programs before installing Virtual Remote Tool. If another program is running, the installation may not be com-
pleted.
1 To obtain links for the software go to the Dukane product website and look at the projector model downloads.
107
7. User Supportware