Answering system
Answering system settings
Voice guide to set up answering system
This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set
the number of rings, and set the message alert tone.
To use the voice guide feature:
MENU/
1. Press
2. Press
or
CID
/SELECT.
press
MENU
3. Press
or
CID
/SELECT. You hear a voice prompt, "This voice guide
MENU
will assist you with the basic setup of your answering
system."
4. Set up your answering system by inputting designated
numbers, as instructed in the voice guide.
Notes:
You can press CANCEL on the telephone base to quit the voice guide at any time.
f
After a power outage, the telephone base prompts you to set the date and time, and Smart call blocker. After these
f
settings are done or skipped, the telephone base then prompts if you want to set up the answering system via voice
guide. Press
/SELECT to start the setup.
MENU
on the telephone base in idle mode.
SELECT
to highlight Answering sys, then
DIR
to highlight Voice guide, then press
DIR
126
>Answering sys
Smart call blk
Answer ON/OFF
>Voice guide