La Crosse Technology WS-2317 Operation Manual page 33

values against the MIN/MAX values reached. To deactivate
the general weather alarm icon, press the ALARM key.
Important
When entering the alarm set mode for a specific weather or
temperature condition, the corresponding alarm is
automatically enabled (ON) when the SET key is pressed,
regardless of its previous setting and the alarm value will flash
to indicate that it has been activated. Press the ALARM key
to confirm the setting and continue pressing the ALARM key
to toggle through each alarm mode until it returns to the
normal display mode or press the MIN/MAX key at any time to
exit the alarm setting modes.
When a set weather alarm condition has been activated, that
particular alarm will sound and flash for approximately 2
minutes but will continue to flash until weather conditions have
become more stable.
Weather Alarms
The weather alarms are settable for when certain weather
conditions are met according to the users' requirements. For
example, the user can set the thresholds for the outdoor
temperature to +86°F (high) and 14°F (low), while only
enabling the high alarm and disabling the low alarm (i.e.
temperatures <14°F won't trigger alarm, but temperatures
>+86°F will).
Alarm setting
Storm threshold
Relative Air
Pressure
Outdoor
Temperature
Indoor
Temperature
Humidity (all)
Rainfall 24h
Minimum
0.09 inHg
27.10 inHg
-21.8°F
14.1°F. No alarm
will sound if the
minimum indoor
temperature alarm
is set below this
value.
1% RH
0.0 inch
33
Maximum
0.27 inHg
31.89 inHg
+157.8°F
+139.8°F
99% RH
39.37 inch