Min/Max Programming Modes - La Crosse Technology WS-2317 Operation Manual

12. Storm warning sensitivity setting 9, 12, 15, 18, 21, 24, 29
inHg (default 9 inHg)
13. Audible storm alarm On/OFF (default ON)
To change any of the above values, once you are in the
setting mode, use the PLUS (+) or MINUS (-) keys to select
the values followed by the SET key to enter the next setting.
Continue to press the SET key to toggle through the setting
mode until the LCD returns to the normal display mode or
press the MIN/MAX key at any time to exit.
Note!
Keeping the PLUS (+) or MINUS (-) key depressed when
setting certain units in the manual setting mode will
increase/decrease digits in greater steps.
Manual time setting
The base station will continue to scan for the radio controlled
time signal from 12am-6 am (1am-6pm summer time) each
day despite it being manually set. During reception attempts
the WWVB tower icon will flash.
If reception has been unsuccessful, then the WWVB
•
tower icon will not appear but reception will still be
attempted the following hour within the time frame
If reception has been successful, the received time and
•
date will overwrite the manually set time and date and no
further reception is attempted until the following day
14.

MIN/MAX Programming Modes

MIN/MAX display Mode
The MIN/MAX Mode provides the user with information about
the MIN/MAX values of all weather data together with the time
and date at which these values were recorded.
Entering each MIN/MAX mode
In the normal display mode for e.g. the indoor temperature
and humidity, press MIN/MAX key to toggle the display
between the maximum, minimum and current records. While
the maximum or minimum values are shown press the
DISPLAY key once to show the time and date that value was
24