Weather Station; 12-Hour Time Format; Power Requirements; Manually Set Time: Program Menu - La Crosse Technology 327-1414WV2 Manual

 Time display: 12-hour or 24-hour format.
 Default is 12-hour time.
 Use the Program Menu to switch time formats.
 3-AAA Alkaline batteries power the Professional weather station.
 The TIME SET button will move through the program menu.
 The ▲/▼ buttons will adjust values.
 Press the LIGHT button at any time to exit.
Program Menu:
Beep On/Off
•
Atomic time signal (On/Off)
•
Time Zone
•
DST (Daylight Saving Time On/Off)
•
12/24 Hour time format
•
• Hour
• Minutes
• Year
Month
•
Date
•
Mph/Kph
•
Fahrenheit/Celsius
•
The TIME SET button will move through the program menu. To change a value use
the ▲/▼ buttons.
1. Hold the TIME SET button five seconds so that BEEP and the word ON will
flash. Press and release the ▲/▼ buttons to turn this to OFF to avoid beep
sounds when pressing a button. Confirm with the TIME SET button and move to
atomic time (WWVB ON/OFF).
2. WWVB and the word ON will flash. Press and release the ▲/▼ buttons to turn
this to OFF if you do not wish WWVB time reception. Confirm with the TIME SET
button and move to time zone.
Note: If OFF is selected, you will skip #3 & #4 and move next to 12/24 hour
time format.
3. EST will flash. Press and release the ▲/▼ buttons to select a different Time
Zone: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST=
Pacific, AKT= Alaska, HAT=Hawaiian time zone. Confirm with the TIME SET
button and move to DST.
4. DST will flash and the word ON. Press and release the ▲/▼ buttons to turn this
to OFF if you do not observe DST. Confirm with the TIME SET button and move
to the 12/24 hour time.
5. 12HR will flash. Press and release the ▲/▼ buttons to select the correct hour.
Confirm with the TIME SET button and move to the hour
La Crosse Technology, Ltd.

WEATHER STATION

12-HOUR TIME FORMAT

POWER REQUIREMENTS

MANUALLY SET TIME: PROGRAM MENU

Page 9